1set/lot DC12-24V 18A RGB led controller 2.4G touch screen RF remote control for 5050/3528 RGB led strip/bulb/downlight
|45 days Money back Returns accepted if product not as described, buyer pays return shipping; or keep the product & agree refund with seller.|
Guarantees: On-time Delivery 60 days
1set DC12-24V 18A RGB led controller 2.4G touch screen RF remote control for 5050/3528 RGB led strip/bulb/downlight Note:This package don’t include AAA battery,please buy it by yourself.So sorry to you about it. Product Name: 2.4G Touch screen LED RGB controller Led type: High Power Led Color: White Input voltage: 12-24V DC control way:RGB three channels MAX load current:6A each color connection mode: common anode net weight: 150g Controller battery: 2PCS* AAA battery(not included) This item is a high-performance RGB led touch remote controller, adopting the most advanced PMW control technology, controlling all RGB led products with four lines and three circuits(common anode), owning 640 thousand colors and 20 automatical changing modes to choose.
Also, it has the momory function(that is to say, the previous settings will be resumed when power on again). It is widely used in led RGB strip light,led module and so on.
With the technology of the 2.4G high frequency wireless remote control, it has the characteristics of low power consumption, long distance transmission, and strong anti-interference ability, high speed telecommunication, etc.
The remote looks fashionable and elegent, with simple and practical functions of color changing and brightness dimming, the capacitive touch screen design makes the remote easy to use.
The modular design and easy screwed terminals enable the controller easy to match with all kinds of led light products
Attention:(Read it carefully)
Code matching: For a new kit,the remote can work only when it is programmed to the controller.
Please follow the below instruction.
Correctly connect the power supply,LED controller and LED load.
Switch off the power,then switch on again,and press key 5 once(within 3 seconds) the moment you see the light is on.The LED light blinks twice slowly when it is done.
Code Clearing: The kit will stay in the original state after code clearing.It can work when code rematching is done.
Also,correctly connect the power supply,LED controller and LED load.
Switch off the power,then switch on again,and long press key 5 once(within 3 seconds) the moment you see the light is on.The LED light blinks twice slowly when it is done.
1. The input voltage of this controller should be follow the specifications, other high voltage would most probably destroy it
2. The 4wires coming out of the controller can’t be incorrectly interconnected or short circuit could occur
3. Connect the wires of the controller and LED fittings as per the instruction
4. Don’t peel off the label on the controller in case any indication information will be missed.
5. The standard warranty is one yeas Our company won’t be responsible for any damage of the Controller due to any wrong operation.
1x LED RGB Controller 1x LED remote controller 1x manual user
The comparison chart of PCB Board between ours and others.
Area 1, Marked by the Red Line(the main control chip and 2.4G chip power pack). We adopt the 7805 to lower the high voltage to 5V, and then stabilize it to 3.3V . The main control voltage is highly stable if the external power supply changes suddenly, while another one adopt a common chip directly,which would cause the unstable performance and big pressure drop if the external voltage is unstable.
Area 2, Marked by the Purple Line(the main control chip). We adopt the ST semiconductor (Italian method) Flash SCM with the built-in memory function, which can be programmed repeatedly, while another one adopt the cheap one-time OTP SCM without the built-in memory function and repeatedly programmed function.
Area 3, Marked by the Yellow Line(Signal Receiver). We adopt built-out copper wire, while they adopt the PCB antenna with the bad anti-interference and weak signal receiving function.
Area 4, Marked by Blue Line(The Electrical Linear). Our electric circuit have more capacity and stability, which can hold more heat and current.
Connecting Method Effect Show
0 out of 5 (0 Ratings)
|Positive (0 %)||
4 Stars (0)
|Shipping Company||Shipping Cost||Estimated Delivery Time|
|3 - 7 days|
|3 - 7 days|
|5 - 14 days|
|Post Air Mail||Free Shipping||15 - 45 days|
|Return Policy||If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.
N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
|Seller Service||On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).|
Sale 100 Pcs Binding Post Speaker Terminal Cable For Banana Plug Length 33mm
High quality 220-240V 180 Degree Outdoor Security PIR Infrared Motion Sensor Detector Movement Switch Two color 12 Meter ET039
$ 12.99 / piece
1 piece CA23RS 2.5GHZ 400W Coaxial CA-23RS Lightning Arrester Surge Protector ( N Connector ) Free Shipping
Hot Sale 30 Piece Single 1 Pin Cable Wire Wiring Connecting For Lamp MKVSE-101 Wago Connectors Findings Bevindingen China
$ 5.00 / piece
1 piece 85x58x25mm Aluminium electronics pcb box cabinet szomk aluminum enclosures
Inductive Square Proximity Sensor Switch DC6-36V 3-Wire NPN NO TL-W5E1 5mm
online shopping, buying directly from manufacturers?
- Go to Alibaba.com and enter the wanted item into search field.
- Having made your choice, click "Contact supplier" button on the right
- On the next page enter your request and click "Send" button.
- Upon clicking you will be asked to get registered. Do it and wait for the reply.